← Back
2013 Ford F-350 Super Duty
Reliability tier: verified - see /disclosure/
Engine: 6.7L (Power Stroke, 6.7L)
gen1 - 400hp/800lb-ft; Garrett GT32 single-sequential turbo on ceramic bearings (the generation's signature failure), Bosch CP4.2 pump, TorqShift 6-speed
Applicable failure modes (11)
- Dual-circuit cooling system leaks (radiator / crossover tube / degas bottle / water pump)
- CP4.2 high-pressure fuel pump contamination cascade
- DEF / SCR / NOx sensor faults
- DPF clogging / regeneration problems
- EGR cooler thermal-fatigue coolant leak
- EGR valve soot clogging / sticking
- Low-pressure fuel supply weakness (lift pump, filters, water-in-fuel)
- Glow plug wear and cold-start faults, plus an isolated 2011-2013 tip-separation defect
- Piezo injector wear and fuel dilution of engine oil
- Intercooler condensation ingestion + cold-side charge-pipe fatigue
- VGT turbocharger failure - generation dependent (ceramic-bearing GT32 vs journal-bearing GT37+)
Applicable parts (33)
- Banks Power Boost Tube System, hot and cold side (2011-2016 6.7L Power Stroke)
- 6.7L Power Stroke EGR Cooler Upgrade with H-Core Technology, 2011-2024 (Bullet Proof Diesel)
- 6.7L Power Stroke Coolant Crossover Tube (Ford BC3Z-8C471-A, 2011-2016)
- ford-powerstroke-6_7: coolant-hose (honest catalog gap)
- 6.7L Power Stroke CP4.2 High-Pressure Fuel Injection Pump
- DEF (Diesel Exhaust Fluid) Injector
- DEF (Diesel Exhaust Fluid) Injector (current service PN AL3Z-5J281-B)
- 6.7L Power Stroke EGR Cooler (Heat Exchanger), gen1/gen2
- EGR Cooler Seal Kit
- EGR Cooler Seal Kit (current service PN BC3Z-9P455-B)
- Exhaust Gas Temperature (EGT) Sensor, single
- Exhaust Gas Temperature (EGT) Sensor, 4-sensor set (DPF/DOC bank)
- 6.7L Power Stroke Fuel Contamination Repair Kit, 2011-2022 (XDP / Alliant Power)
- 6.7L Power Stroke Fuel Filter Element (Ford BC3Z-9N184-B, 2011-2016)
- 6.7L Power Stroke Billet Fuel Filter Housing / Leak Prevention Kit (S&S Diesel Motorsport)
- 6.7L Power Stroke Glow Plug
- Glow Plug Control Module (gen1)
- Glow Plug Control Module (gen1) (current service PN BC3Z-12B533-C)
- 6.7L Power Stroke Fuel Injection Kit, Chassis Cab/gen1-shared (Narrow Frame), Cylinders 1/2/7/8
- 6.7L Power Stroke Fuel Injection Kit, Chassis Cab/gen1-shared (Narrow Frame), Cylinders 3/4/5/6
- 6.7L Power Stroke In-Tank Low-Pressure Lift Pump, gen1 (2011-2014)
- 6.7L Power Stroke CP4-to-DCR Pump Conversion (S&S Diesel Motorsport)
- 6.7L Power Stroke CP4 Disaster Prevention Bypass Kit, Gen2.1 (S&S Diesel Motorsport)
- 6.7L Power Stroke LPK/DPK Replacement Filter Kit (S&S Diesel Motorsport)
- 6.7L Power Stroke Thermostat, Driver Side
- 6.7L Power Stroke Turbocharger Pedestal Gasket
- 6.7L Power Stroke Turbocharger Assembly (gen1, GT32 ceramic-bearing)
- 6.7L Power Stroke Turbocharger Assembly (gen1, GT32 ceramic-bearing) (current service PN BC3Z-6K682-C)
- 6.7L Power Stroke Auxiliary Water Pump, Dual Alternators
- 6.7L Power Stroke Auxiliary Water Pump, Single Alternator
- 6.7L Power Stroke Primary (Engine) Water Pump, gen1/gen2
- 6.7L Power Stroke Main Radiator, XDP X-TRA Cool XD291 (2011-2016)
- 6.7L Power Stroke Secondary Radiator, XDP X-TRA Cool XD299 (2011-2016)
Platform recipes (5)
- Aftertreatment repair for the 2011-2022 6.7 (modes fm-ps67-def-system / fm-ps67-dpf-clog): sensors lie first - verify the DPS and EGT sensors before any assembly spend
- Full repair path after a confirmed CP4.2 high-pressure pump contamination event (fm-ps67-cp4-fuel-pump): metal debris in the fuel filter means the pump, injectors, rails, and lines are all contaminated, not just the pump
- Preventive measures against the CP4.2 contamination cascade (fm-ps67-cp4-fuel-pump) and the separately-documented plastic fuel-filter-housing cracking issue (fm-ps67-fuel-delivery) - cheap insurance against the platform's single costliest failure mode, applicable across all three generations since the CP4.2 pump has been used throughout (an aftermarket parts maker's 6.7L Power Stroke guide, a parts retailer's 6.7L Power Stroke guide)
- EGR repair by generation (modes fm-ps67-egr-valve / fm-ps67-egr-cooler): the 6.7's EGR hardware is generation- AND frame-split
- Turbocharger repair for fm-ps67-vgt-turbo - and the platform's clearest illustration of why generation matters: gen1 (2011-2014, Garrett GT32 ceramic-bearing) and gen3 (2020-22, per Ford's own catalog note) use ENTIRELY DIFFERENT turbocharger assembly part numbers (BC3Z-6K682-A/C vs LC3Z-6K682-A) - ordering the wrong one is not a simple supersession mistake, it is the wrong physical part