← Back
2020 Ford F-350 Super Duty
Reliability tier: verified - see /disclosure/
Engine: 7.3L V8 Gas (Godzilla) (Ford Godzilla, 7.3L), 2v
OHV 2-valve V8, cast-iron block/aluminum heads, sequential multiport fuel injection (no DI, no HPFP), VCT, no cylinder deactivation; 10.5:1 compression; 430hp @ 5,500 and 475 lb-ft @ 4,050 lb-ft in the pickup lines; TorqShift 10-speed (10R140) behind this engine (context only - engine platform). Intro year: replaced the 6.8L Triton V10 as the Super Duty big-gas engine (V10 ended in 2019); on the chassis-cab lines the 7.3 is the gas option.
Applicable failure modes (7)
- Cooling service (water pump / thermostat / degas)
- Exhaust manifold leaks (broken manifold bolts)
- Fuel delivery service (in-tank pump / filter / PFI injectors)
- Ignition service wear (plugs / coils)
- Cam lobe and lifter (tappet) wear, worst with long idling
- Cracked oil pump drive gear (front-of-engine tick at idle, 2020-2022 7.3)
- Broken valve springs (sudden single-cylinder misfire)
Applicable parts (20)
- 7.3L Godzilla Camshaft Position Sensor, 2020-2022 (OEM)
- Godzilla Exhaust Manifold Gasket (OEM)
- 7.3L Godzilla Exhaust Manifold, left, 2020-2022 (OEM)
- 7.3L Godzilla Exhaust Manifold, right (OEM, current service number)
- 7.3L Godzilla In-Tank Fuel Pump / Sender, 2020-2022 (OEM)
- 7.3L Godzilla Ignition Coil, 2020-2022 (OEM)
- 7.3L/6.8L Godzilla Knock Sensor (OEM)
- 7.3L Godzilla Oil Pressure Sender, 2020-2022 (OEM)
- ford-godzilla-7_3: oil-pump (honest catalog gap)
- Godzilla PCV Valve (OEM)
- 7.3L/6.8L Godzilla Push Rod (OEM)
- Godzilla Rocker Arm Pivot, left (OEM)
- Godzilla Rocker Arm Pivot, left (current PN VC3Z-6A585-B)
- Godzilla Rocker Arm Pivot, right (OEM)
- Godzilla Rocker Arm Pivot, right (current PN VC3Z-6A585-A)
- 7.3L/6.8L Godzilla Spark Plug (OEM)
- 7.3L/6.8L Godzilla Thermostat (OEM)
- 7.3L/6.8L Godzilla Throttle Body (OEM)
- 7.3L/6.8L Godzilla Valve Spring (OEM, current hardware)
- 7.3L Godzilla Water Pump 2020-2022 (LC3Z-8501-A)
Platform recipes (4)
- Cooling service for the 7.3L Godzilla: pressure-test, then water pump and thermostat as wear items, pump numbers split by year (mode fm-gz-cooling-service)
- Exhaust manifold leak repair for the 7.3L Godzilla (mode fm-gz-exhaust-manifold-leaks): cold-start tick and soot tracks at the flange
- Ignition service for the 7.3L Godzilla (mode fm-gz-ignition-service): 16 plugs on the 2v SOHC V8, one coil per cylinder
- Tapping that follows one cylinder on the 7.3L Godzilla: check Ford program 24B27 first, separate the oil pump drive gear (lower front, 2020-2022) from the valvetrain, then lifters and the cam lobe (mode fm-gz-lifter-cam-wear)