← Back

Recipe - Ram 1500 EcoDiesel 3.0L V6 (2014-2019)

Specific Fix build

Reliability tier: verified - verify before ordering, see /disclosure/

CP4.2 cascade protocol for the 3.0L EcoDiesel (mode Bosch CP4.2 high-pressure pump failure (recall 22V-406)): P0087 family codes, hard start, metal in the system. Check recall 22V-406 (FCA Z46) by VIN first - it replaces the pump and inspects the fuel system. The debris check decides everything: metal found = full cascade, no metal = metering-valve/sensor diagnostics first.

Parts

Install order

  1. check recall 22V-406 (Z46) status by VIN - the pump replacement may be free; interim letters went out 07/2022
  2. pull the filter element and inspect for metallic debris BEFORE replacing parts (the whole diagnosis hangs on this)
  3. no metal: verify the metering valve and pressure sensor path (P0087 electrical/supply side) before ordering the pump
  4. metal found: pump + injectors + lines flush per the recall inspection scope - do not reuse any high-pressure component
  5. after repair: strict filter discipline; consider the FASS lift pump for filtration/flow margin

Expected outcome

Parts budget

About $60-$3,500 in parts. It depends on what the diagnosis finds; each option below is what you buy together. Prices marked "at Dave's" are Dave's Auto Center's, the same as in his store; the others are approximate prices from OEM and maker catalogs, rounded (a manufacturer's list price can run higher). Parts only, no labor.