← Back

Failure mode - EcoDiesel 3.0L V6 (2020-2023)

Stall / no-start reports (mixed causes: crank sensor codes, HPFP recall parts shortages, electrical)

Reliability tier: aggregated - verify before ordering, see /disclosure/

Short answer: Stall / no-start reports (mixed causes: crank sensor codes, HPFP recall parts shortages, electrical). First sign owners report: engine stalls or shuts off in motion (often at low speed), then no-start or long-crank. The documented fix: replace the crankshaft position sensor when its circuit codes are confirmed. Provenance: aggregated - see /disclosure/.

Symptoms

Compare with the other causes of the same sign on this engine: hard start, long crank or no-start (2 causes) · stalls or dies while driving (2 causes)

Root cause

VOQ: 31 VIN-confirmed diesel complaints describe a stall, shutdown or no-start. The cluster is deliberately kept mixed: the A630's tone-wheel recalls ran through the 2020 model year and never covered the gen-3, no campaign names a gen-3 stall defect, and the sample spans crank-sensor codes (P0336), electrical shutdowns and HPFP-recall waitlists. Read each case from its own codes.

Diagnosis

Fixes

replace the crankshaft position sensor when its circuit codes are confirmed ()

complete the HPFP campaign first when fuel-pressure codes ride along ()

Prevalence

occasional

Affected configurations (11)

Cite this record: Torque Index, "Stall / no-start reports (mixed causes: crank sensor codes, HPFP recall parts shortages, electrical)" (EcoDiesel 3.0L V6 (2020-2023)), https://torqueindex.com/failure-modes/fm-ed3-stall-no-start/, record verified November 14, 2026, tier aggregated